ACTIVE LEAK REPAIR KIT

Product Image

ACTIVE LEAK REPAIR KIT


WRAP SEAL ULTRA QUICK REPAIR KIT FOR ACTIVE PIPE LEAKS



ACTIVE LEAK REPAIR KIT

WRAP SEAL ULTRA QUICK REPAIR KIT FOR ACTIVE PIPE LEAKS

FEATURES:

  • Repairs under active leak up to 150 psi (11 kg/cm2) pressure
  • No shutdown required
  • Works on any metal or non-metal pipes
  • Applicable to pipes up to 18″ (457 mm) diameter
  • Repairs leak in 15 minutes
  • Withstand pressure up to 500 psi (35 kg/cm2)
  • Withstand temperature up to 200 °C (392 °F)
  • Safe for drinking water and resistant to most chemicals
  • Ideal for pipeline reinforcement

APPLICABLE MATERIAL:

  • Steel
  • Copper
  • Aluminium
  • Galvanized steel
  • PVC
  • CPVC
  • Stainless steel
  • Polyethylene
  • Polypropylene
  • Cast-iron
  • Concrete
  • FRP/GRE

 CHEMICAL RESISTANCE:

  • Oil
  • Water (drinking water, wastewater, steam)
  • Solvents (acetone, toluene, MEK, ethyl alcohol)
  • Mild acids (hydrochloric acid, sulfuric acid) and alkalis
  • Chemical (ethylene glycol, xylenes, ammonia)
  • Hydrocarbons
  • Bases
  • Slurries
  • Fuels (petroleum, diesels, gasoline)
  • Gases (LNG, LPG)
  • Organic salts 

WORKING TIME (FIBERGLASS TAPE):

 1 minute at 30 °C (86 °F)

CURING TIME:

  • 30 minutes at 30 °C (86 °F)
  • Heat may be applied to decrease curing time
  • Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time. 

APPLICATION:

  • Pipe repairs
  • Active pipe leaks
  • Sealing joints
  • Hazardous material spill control
  • Reinforce thinning walls
  • Repairs in hard to reach areas
  • Underwater repairs

OPERATING TEMPERATURE:

 -50 °C (-58 °F) to 200 °C (392 °F)

OPERATING PRESSURE:

  • Recommended for pressure up to 500 psi (35 kg/cm2)
  • (Result vary depending on pipe size, type of pipe, hole size, pipe content and method of application)

APPLICABLE INDUSTRIES:

appli 1 - Active Leak Repair KitBuilding Facilitiesappli 10 - Active Leak Repair Kit  Offshore
appli 2 - Active Leak Repair KitElectronicsappli 11 - Active Leak Repair KitFood Processing
appli 3 - Active Leak Repair KitIndustrialProcessingappli 12 - Active Leak Repair KitPetrochemica
appli 4 - Active Leak Repair KitIrrigationappli 13 - Active Leak Repair KitPharmaceutical
appli 5 - Active Leak Repair KitOil & Gasappli 14 - Active Leak Repair KitPowerGeneration
appli 6 - Active Leak Repair KitChemicalappli 15 - Active Leak Repair KitPulp & Paper
appli 7 - Active Leak Repair KitManufacturingPlantsappli 16 - Active Leak Repair KitWastewater
appli 8 - Active Leak Repair KitMarineappli 17 - Active Leak Repair KitWaterDistribution
appli 9 - Active Leak Repair KitMilitary  

 

TECHNICAL DATA:

PropertyValue
Tensile Strength3920 psi (276 kg/cm²)
Bond Strength230 psi (16 kg/cm²)
Tensile Elongation1.2% ± 0.7%
Compression Strength13,750 ± 530 psi (967 ± 37 kg/cm²)
Yield Strength2260 psi (159 kg/cm²)
Cured Hardness82 Shore D
Dielectric Strength400 Volts/mil
Pipe sizeNumber of rolls / size required
 50 psi (4 kg/cm2) 10 plys150 psi (11 kg/cm2) 15 plys400 psi (28 kg/cm2) 20 plys
½” (15mm)1 A1 A1 A
¾” (20mm)1 A1 A1 A
1″ (25mm)1 A1 A2 A
1¼” (32mm)1 A2 A3 A
1½” (40mm)2 A2 A1 B
2″ (50mm)1 B1 B1 B
2½” (65mm)1 B1 B2 C
3″ (80mm)1 B2 C2 C
4″ (100mm)1 B2 C3 C
Pipe sizeNumber of rolls / size required
 50 psi (4 kg/cm2) 10 plys150 psi (11 kg/cm2) 15 plys400 psi (28 kg/cm2) 20 plys
5″ (125mm)2 C2 C3 C
6″ (150mm)2 C2 C4 C
8″ (200mm)2 C3 C5 C
10″ (250mm)3 C4 C6 C
12″ (300mm)4 C5 C8 C
14″ (350mm)4 C6 C8 C
16″ (400mm)5 C7 C9 C
18″ (450mm)5 C8 C9 C
Roll sizeA (2″ x 6′) (50mm x 1.8m)B (2″ x 12′) (50mm x 3.6m)B (3″ x 9′) (75mm x 2.7m)C (4″ x 12′) (100mm x 3.6m)

 

WRAP SEAL ULTRA ACTIVE LEAK REPAIR PROCEDURE:

 

        active pro 1 - Active Leak Repair Kit

Minimize the flow rate and reduce system pressureactive pro 6 - Active Leak Repair KitContinue to wrap SealXpert Ultra Sealing Tape onto pipe while pushing the Seal Stic onto leak location
          active pro 2 - Active Leak Repair KitRoughen the area to be  repairedactive pro 7 - Active Leak Repair KitImmerse Wrap Seal Fiberglass Tape into water
active pro 3 - Active Leak Repair Kit Knead the Seal Sticactive pro 8 - Active Leak Repair Kit

Wrap the Wrap Seal Fiberglass Tape above the repair   tape  as tightly and evenly as possible, using the entire   roll

 

active pro 4 - Active Leak Repair KitPlace the Seal Stic away from the leak locationactive pro 9 - Active Leak Repair KitDiscard the plastic tube at the end of the roll
active pro 5 - Active Leak Repair Kit

Start wrappingtheSealXpertUltra SealingTape a few distanceaway from the leaklocation

 

active pro 10 - Active Leak Repair KitWet gloves in water and quicklycompress the bubbling  resins back into the fiberglass wrap until allbubbling  has stopped.Repair completed with smooth and  hard ivory appearance

 

 

 

WRAP SEAL ULTRA QUICK REPAIR KIT FOR ACTIVE PIPE LEAKS

 

1512 Active Leak Repair - Active Leak Repair Kit

 

PACKAGE:

  • 1 roll of Wrap Seal Fiberglass Tape
    • 2″ x 6′ (50 mm x 1.8 m)
    • 2″ x 12′ (50 mm x 3.6 m)
    • 3″ x 9′ (75 mm x 2.7 m)
    • 4″ x 12′ (100 mm x 3.6 m)
  • 1 roll of SealXpert Ultra Sealing Tape
    • 1″ x 16′ (25 mm x 5 m)
    • 1″ x 16′ (25 mm x 5 m)
    • 1¼” x 16′ (32 mm x 5 m)
    • 2″ x 16′ (50 mm x 5 m)
  • 1 unit of Seal Stic Quick Cure Epoxy
  • 1 pair of latex gloves
  • Operating instruction