Products Details

SEALXPERT AT277 THREAD LOCKER

THREADLOCKER

Threadlocker, also known as thread-locking fluid, is applied to threads of fasteners such as screws and bolts to

fill up to gaps and void spaces between metal components, and to mechanically bond the metal components together.

Prevent loosening and leakage from shock and vibration
Used for permanent locking and sealing M24 – M36 threaded fasteners, prevent thread from rust
Typically used for large diameter thread locking and sealing

Property	AT222	AT242	AT243	AT262	AT270	AT271	AT272	AT277	AT290
Typical Use	M2-M8, removable	M8-M16, removable	M8-M20, oil contamination	M10-M26, permanent locking	M25, permanent locking	M16-M26, permanent locking	M25-M80, permanent locking	M24-M36, permanent locking	Under M12, wicking
Max Gap Fill	0.13 mm	0.13 mm	0.13 mm	0.13 mm	0.13 mm	0.13 mm	0.25 mm	0.25 mm	0.10 mm
Uncured Colour	Purple	Blue	Blue	Red	Green	Red	Red-orange	Red	Green
Viscosity (mPa.s)	1,200 (Thixotropic)	1,700 (Thixotropic)	2,250 (Thixotropic)	1,800 (Thixotropic)	500	500	4,000-15,000 (Thixotropic)	7,000	12
Specific Gravity	1.05 g/cm³	1.05 g/cm³	1.05 g/cm³	1.10 g/cm³	1.10 g/cm³	1.12 g/cm³	1.11 g/cm³	1.12 g/cm³	1.08 g/cm³
Breakaway Torque	6 Nm	12 Nm	20 Nm	22 Nm	26 Nm	27 Nm	23 Nm	30 Nm	10 Nm
Prevail Torque	4 Nm	5 Nm	7 Nm	30 Nm	36 Nm	30 Nm	25 Nm	30 Nm	26 Nm
Temperature Range	-50 to 150°C (-58 to 302°F)	-50 to 150°C (-58 to 302°F)	-50 to 150°C (-58 to 302°F)	-50 to 150°C (-58 to 302°F)	-50 to 150°C (-58 to 302°F)	-50 to 150°C (-58 to 302°F)	-55 to 200°C (-67 to 392°F)	-50 to 150°C (-58 to 302°F)	-50 to 150°C (-58 to 302°F)
Fixture Time	10-20 min	10-20 min	10-20 min	10-20 min	10-20 min	10-20 min	40 min	23-30 min	5-15 min
Full Cure Time	24 hrs	24 hrs	24 hrs	24 hrs	24 hrs	24 hrs	24 hrs	24 hrs	2 hrs

SEALXPERT AT277 THREAD LOCKER

2276 Threadlocker 277 Pipe Wrapping - THREADLOCKER (EN)