STAINLESS STEEL PIPE CLIP
SEALXPERT STAINLESS STEEL PIPE CLIP
STAINLESS STEEL PIPE CLIP
SEALXPERT STAINLESS STEEL PIPE CLIP
FEATURES:
- Makes pipe clips from 2” (50 mm) to 382” (9700 mm)
- Easy to use
- Versatile and fast to install
- No special tool is required
- Stainless steel 304 material
- Free to cut to any diameters required
APPLICATION:
- For securing, mounting, strapping, clamping and positioning
- Can be used for all conventional clamping jobs
- Make any sizes from 2” (50 mm) diameter to 382” (9703 mm) diameter within seconds
APPLICABLE INDUSTRIES:
 | Building & Facilities |  | Offshore |
 | Electronics |  | Food Processing |
 | Industrial Processing |  | Petrochemical |
 | Irrigation |  | Pharmaceutical |
 | Oil & Gas |  | Power Generation |
 | Chemical |  | Pulp & Paper |
 | Manufacturing Plants |  | Wastewater |
 | Marine |  | Water Distribution |
 | Military |
TECHNICAL DATA:
| Property | Value |
|---|---|
| Material Grade | All Stainless Steel 304 |
| Band Length | 100’ (30.5 m) |
| Band Width | 0.5” (12.7 mm) |
| Head | 0.3” (7.9 mm) Slotted Hex Head Screw |
| Closure Components | 0.6” (14.2 mm) Wide Fastener & Screw Housing Assembly |
SEALXPERT STAINLESS STEEL PIPE CLIP INSTALLATION PROCEDURE:
- Determine actual band length in one of two ways:
- (a) If diameter is known, refer to band length table below
- (b) If diameter is not known, measure circumference with string, twine, etc. and subtract 4” (to allow for length of fastener ends) to determine actual band length.
| Pipe Diameter | Length to cut on Mark | Pipe Diameter | Length to cut on Mark | Pipe Diameter | Length to cut on Mark |
|---|---|---|---|---|---|
| 2” (50.8 mm) | 2-1/2” (63.5 mm) | 22” (558.8 mm) | 65-7/8” (1673.2 mm) | 60” (1524.0 mm) | 184-13/16” (4694.2 mm) |
| 3’ (76.2 mm) | 5-1/16” (128.6 mm) | 24” (609.6 mm) | 72-1/8” (1832.0 mm) | 62” (1574.8 mm) | 191-1/8” (4854.6 mm) |
| 4” (101.6 mm) | 8-7/8” (225.4 mm) | 26” (660.4 mm) | 77-1/4” (1962.2 mm) | 64” (1625.6 mm) | 197-7/16” (5014.9 mm) |
| 5” (127.0 mm) | 11-7/16” (290.5 mm) | 28” (711.2 mm) | 83-5/8” (2124.1 mm) | 66” (1676.4 mm) | 203-5/8” (5172.1 mm) |
| 6’ (152.4 mm) | 15-3/16” (385.8 mm) | 30” (762.0 mm) | 89-7/8” (2282.8 mm) | 68” (1727.2 mm) | 209-15/16” (5332.4 mm) |
| 7” (177.8 mm) | 17-3/4” (450.9 mm) | 32” (812.8 mm) | 96-3/8” (2447.9 mm) | 70” (1778.0 mm) | 216-1/4” (5492.8 mm) |
| 8” (203.2 mm) | 21-1/2” (546.1 mm) | 34” (863.6 mm) | 102-5/8” (2606.7 mm) | 72” (1828.8 mm) | 222-9/16” (5653.1 mm) |
| 9” (228.6 mm) | 24-1/8” (612.8 mm) | 36” (914.4 mm) | 108-7/8” (2765.4 mm) | 74” (1879.6 mm) | 228-7/8” (5813.4 mm) |
| 10” (254.0 mm) | 27-7/8” (708.0 mm) | 38” (965.2 mm) | 115-1/4” (2927.4 mm) | 76” (1930.4 mm) | 235-13/16” (5989.6 mm) |
| 11” (279.4 mm) | 30-3/8” (771.5 mm) | 40” (1016.0 mm) | 121-9/16” (3087.7 mm) | 78” (1981.2 mm) | 241-1/2” (6134.1 mm) |
| 12” (304.8 mm) | 34-3/16” (868.4 mm) | 42” (1066.8 mm) | 128” (3251.2 mm) | 80” (2032.0 mm) | 247-13/16” (6294.4 mm) |
| 13” (330.2 mm) | 36-3/4” (933.5 mm) | 44” (1117.6 mm) | 134-5/16” (3411.5 mm) | 82” (2082.8 mm) | 254-1/8” (6454.8 mm) |
| 14” (355.6 mm) | 40-1/2” (1028.7 mm) | 46” (1168.4 mm) | 140-5/8” (3571.9 mm) | 84” (2133.6 mm) | 260-7/16” (6615.1 mm) |
| 15” (381.0 mm) | 43-1/16” (1093.8 mm) | 48” (1219.2 mm) | 146-15/16” (3732.2 mm) | 86” (2184.4 mm) | 266-5/8” (6772.3 mm) |
| 16” (406.4 mm) | 46-7/8” (1190.6 mm) | 50” (1270.0 mm) | 153-1/4” (3892.6 mm) | 88” (2235.2 mm) | 272-15/16” (6932.6 mm) |
| 18” (457.2 mm) | 53-1/8” (1349.4 mm) | 54” (1371.6 mm) | 165-7/8” (4213.2 mm) | 92” (2336.8 mm) | 285-9/16” (7253.3 mm) |
| 19” (482.6 mm) | 55-3/4” (1416.1 mm) | 56” (1422.4 mm) | 172-3/16” (4373.6 mm) | 94” (2387.6 mm) | 291-7/8” (7413.6 mm) |
| 20” (508.0 mm) | 59-1/2” (1511.3 mm) | 558” (1473.2 mm) | 178-1/2” (4533.9 mm) | 96” (2438.4 mm) | 298-3/16” (7574.0 mm) |
- Measure the band to the proper length and cut through the center of the nearest round hole with shears, snips, hacksaw, etc.
- Engage one screw housing end to one perforated end by turning the screw three or four times.
- Complete the clamp by diagonally inserting the ends of the engaged fastener assembly into the band through the tops of the square holes at each end of the band.
- Tighten the finished clamp.
SEALXPERT STAINLESS STEEL PIPE CLIP
PACKAGE:
- 100’ (30.5 m) continuous length of stainless steel band
- 25 adjustable fasteners (worm drive buckles)
- 10 band splices
- Weight: 3kg per set